use
electrolux
21
Opening the door after the
programme has started
First set the machine to pause by pressing
the
“Start/Pause”
button. The
corresponding message will appear on
the display.
If the
“door”
icon and the message «Door
unlocked» will appear on the display, the
door can be opened.
If the
“door”
icon and the message «Door
unlocked» will not appear on the display,
this means that the machine is already
heating, that the water level is above the
bottom edge of the door or that the drum
is turning.
In this case the door can not be opened.
If you cannot open the door but you need
to open it you have to switch the machine
off by turning the selector dial to
“O”
. After
about 3 minutes the door can be opened
(pay attention to the water level and
temperature!)
.
At the end of the programme
The machine stops automatically.
If the
Rinse Hold”
or Night Cycle
options have been selected, the
“Start/Pause”
light goes off, the icon of
the selected programme and the
message «Finished» appear on the
display and the door remains locked to
indicate that the water must be emptied
out before opening the door.
To empty out the water please read
the steps on the Night Cycle option
paragraph.
Turn the programme selector dial to
“O”
to switch the machine off. Remove the
laundry from the drum and carefully check
that the drum is empty.
If you do not intend to carry out another
wash, close the water tap. Leave the door
open to prevent the formation of mildew
and unpleasant smells.
132978151 EN.qxd 04/12/2006 16:05 Pagina 21
