Electrolux EWF 1268, Инструкция пользователя

Страница: 13 / 48

ENGLISH
which is running, as indicated below:
- set the washing machine to PAUSE by pressing the
START/PAUSE button (the relevant light will flash);
- press the SKIP RESET button once or several
times, until the required phase(s) is(are) cancelled
Example:
In this case,both the
drain and the spin (at the
speed provided for the
selected type of fabric)
will be performed.
This button allows you also to select special
programmes, such as
RINSES , SPIN and DRAIN .
• If the machine is already switched on because it
has just performed a washing programme, proceed
as follows:
- depress SKIP RESET once or repeatidly to
cancel the previously performed programme
(three blinking dashes will appear on the display);
- select the type of fabric by means of the relevant
button;
- select the special programme:
• RINSES
Depress SKIP RESET once , the pilot light WASH
goes out.
• SPIN
Depress SKIP RESET twice , the pilot lights WASH
and RINSES go out.
• DRAIN
Depress SKIP RESET three times , the pilot lights
WASH, RINSES and SPIN go out and only the
pilot light DRAIN remains lit.
Example:
In this case the machine
will perform the rinses
and spin.
• If the machine is switched off:
- depress ON/OFF button to switch it on;
- select the type of fabric by means of the relevant
button;
- select the special programme as previously
described.
11 DELAY START button
This button makes it possible to delay the starting of
the programme by up to 23 hours. The delay you
have selected is shown on the display for about 3
seconds; afterwards, the duration of the programme
reappears.
You must select this option after you have set the
programme and before you press the
START/PAUSE button.
The time value shown on the display will decrease
by one unit every hour till the first 2 hours, and then it
decreases by one unit every 30 minutes.
You can change the delay time at any moment ,
before you press the START/PAUSE button.
If you have already pressed the START/PAUSE
button, and you wish
cancel the delay time, proceed
as follows:
• set the washing machine to PAUSE by pressing the
START/PAUSE button;
• press the DELAY START button twice , to erase
the delay time. The display will indicate
0’
.
• press the START/PAUSE button again.
Important!
The door will be locked throughout the delay time.
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the
START/PAUSE button. After you have closed the
door, press the START/PAUSE button again.
12 Programme phase indicator
lights
When you select a programme, the lights relevant to
the phases that form the programme light up.
After you have started the programme, only the light
relevant to the phase that is currently being carried
out will remain lit.
Prewash
Wash
Rinses
Spin
Drain
13
132987260.qxd 23/03/2005 11:05 Pagina 13 (Nero/Process Black pellicola)