18
7. Select the Spin Speed, the Rinse Hold
or Night cycle
.
Press the SPIN SPEED button repeatedly, in
order to select the desired spin speed or
No Spin
«0»
or the
Rinse Hold
or the
Night Cycle
options. The relevant message will appear on the
second row of the display. The selected spin level
will be shown on the third row next to the spin
button.
If you select the
Rinse Hold
or
Night Cycle
options,
the machine will stop at the end of the programme
with the water still in the tub.
8. Select the desired options
Depress the relevant buttons to select the required
options.
Depending on the selected programme only
certain options are available and shown during
the selection phase.
Note: Not all the options are compatible between
themselves. The uncompatible option icons will
disappear.
9. Select the DELAY TIME
Before you start the programme, if you wish the
starting to be delayed, choose the DELAY option.
The selected delay time value (up to 20 hours) will
appear on the display while selecting.
The end cycle will be updated and shown on the
relative position of the display.
Change
Options
Exit
Delay Start
Start in 30 min
11.25
Temp.Spin
Change
Options
Exit
Delay Start
No
10.55
Temp.Spin
Change
Options
Exit
COTTON
MAX 1400
08.30
10.55
1200
40°C
Temp.Spin
Note:
If the undesired language has been set, press
contemporary SPIN + OPTIONS buttons for about 2
seconds in order to change the language.
Follow the instructions as before.
SETTING THE TIME
You should set the time prior to the first wash and
when changing to and from daylight savings time.
See «Clock setting», Setup.
5. Select the desired programme/fabric
Turn the selector dial, in order to select the desired
programme/fabric. The relevant message will appear
in the display.
The display will show the END CYCLE TIME of the
selected programme, calculated on the basis of the
maximum load for each type of fabric. The
START/PAUSE button light will start flashing.
If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate
the END CYCLE relevant to the maximum load. The
duration value will be gradually adjusted during the
execution of the cycle.
6. Select the temperature
Press the TEMPERATURE button if you wish to
select a temperature value different from the one
proposed by the washing machine.
The message of the maximum available temperature
appears on the second row of the display (instead of
«cycle end at»). In the corner of the third row
appears the indication of the selected temperature.
Change
Options
Exit
COTTON
MAX 95°C
08.30
10.55
40°C
1600
Temp.Spin
Change
Options
Exit
COTTON
Washing
08.30
12.00
40°C 1200
Temp.Spin
M1
M2
M3
E
132990792 GB.qxd 28/07/2004 08.46 Pagina 18
