44
14. Opening the door after the
programme has started
First set the machine to PAUSE by pressing the
“Inicio/Pausa” button.
If the door does not open, this means that the
machine is already heating, that the water level is
above the bottom edge of the door or that the drum
is turning.
If you cannot open the door but you need to open
you have to switch the machine off turning the
selector dial to
PARO
. After about 3 minutes the
door can be opened (pay attention to the water level
and temperature).
To restart the programme turn the dial to the
previous programme repeating the options
previously selected and press “Inicio/Pausa” button.
15. At the end of the programme
The machine stops automatically, the “Inicio/Pausa”
goes out, on the display appears a blinking zero and
the door can be open.
If the
option has been selected, the light of the
“Inicio/Pausa” button goes off, the door remains
locked, the
light remains lit to indicate that the
water must be empitied out before openinig the door.
To empty out water it is necessary to turn the
rogramme selector dial to Reset
PARO
and then:
- select
drain
(Descarga) programme and then
depress the “Incio/Pausa” button:
the water is emptied out without spinning
or
- select the
spin
(Centrifugado) or the
delicate
spin
(Centrifugado Delicado). Select the spin
speed by means of the relevant button and then
depress the “Incio/Pausa” button. The water is
emptied out and the laundry is spun at the
selected spin speed.
Turn the programme selector dial to Reset
PARO
to
switch the machine off.
Remove the laundry from the drum and carefully
check that the drum is empty so as to avoid any
forgotten items being damaged in a subsequent
wash (e.g. shrinking) or their colour running into a
load of whites.
If you do not intend to carry out another wash, close
the water tap.
Leave the door open to prevent the formation of
mildew and unpleasant smells.
132986240GB.qxd 14/02/2005 08:35 Pagina 44 (Nero/Process Black pellicola)
