12
4. Select the required programme
Turn the programme selector dial to the required
programme.
5. Select the required options
The light corresponding to the depressed button
illuminates.
6. Start the programme
To start the selected programme, press the
START/PAUSE button
.
The light
or
illuminates.
7. How to change a programme during
its cycle
Before you make any change, you must pause the
washing machine by pressing the START/PAUSE
button
.
It is possible to change any phase before the
programme carries it out.
When the programme has started, you can only
reset it by turning the programme selector dial to
«
O»
and then you can select the new programme.
The washing water remains in the tub.
30
O
95
60E
60
40
E
40
30
40
40
Operating sequence
Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
of the detergent drawer in order to activate the ECO
valve. Then run a cotton cycle at 95°C, with the
machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
.
If you wish to carry out the prewash, pour detergent
or the stain remover into the appropriate
compartment marked
.
3. Measure out the additive
If required, pour fabric softener into the
compartment marked
,
without exceeding the
«MAX» mark.
C0071
C0070
P0004
132985630.qxd 06/06/2005 11.17 Pagina 12
