welcome
3.
Measure out the fabric softener if required and pour into the compartment marked
not exceeding the ‘Max’
mark in the drawer.
4.
Select the required option (s)
Depress Spin Reduction and/or Quick Wash and/or Super Rinse and/or Rinse Hold button, if required.
5.
Select the required programme. Turn the programme selector dial clockwise to the desired programme.
6.
Start the machine by pressing the On/Off button. The mains on light will illuminate and the machine will start.
7.
At the end of the programme the machine stops automatically. If you have pressed the Rinse Hold button the
machine will stop with the water of the last rinse left in the tub, to prevent the fabric from creasing. To drain the
water and spin, release the same button. To drain only, select programme “R”. The door is controlled by a safety
device which releases 2 minutes after the end of the programme. Switch the machine off by depressing the
On/Off button again, the mains-on light goes out.
Operating sequence drying
1.
Load the laundry
2.
Select the programme by turning the programme selector dial clockwise to the appropriate drying programme.
3.
Select the required time (See programme chart) turn the drying time selector dial clockwise to the correct time
setting in the blue sector.
4.
Start the machine by depressing the On/Off button, the mains-on light and drying light will illuminate and the
machine starts operating.
5.
At the end of the programme the machine stops automatically and the drying light goes out. The door is
controlled by a safety device which releases 2 minutes after the end of the programme. Switch the machine off
by depressing the On/Off button again, the mains-on light goes out. If the laundry is still too damp, select a
further brief drying time, bearing in mind that during the last 10 minutes the appliance carries out a cooling and
anticrease phase.
Operating sequence washing and drying
Follow this sequence if you intend to wash and dry automatically
1.
Load the laundry
2.
Measure out the detergent and fabric softener
3.
Select the required programme
Turn the programme selector dial clockwise to the appropriate programme.
4.
Select the required option, depressing the quick wash button if required.
