Electrolux EWB 85215 W, Руководство пользователя

Страница: 5 / 12

Before turning your appliance on again, en-
sure that it is installed in an area where the
temperature will not fall below freezing.
HOW TO RUN A WASH CYCLE?
USING FOR THE FIRST TIME
• Ensure the electrical and water con-
nections comply with the installation
instructions.
• Remove the polystyrene insert and
all other items inside the drum.
• Run an initial wash cycle at 90°C,
without any washing but with deter-
gent to clean the water tank.
DAILY USE
LOADING WASHING
A
A
• Open the lid of the appliance.
• Open the drum by depressing the locking
button A
1)
: The two shutters unlock au-
tomatically.
• Load the washing, close the drum and
the lid of your washing machine.
Warning! Before closing the lid of your
appliance, ensure that the drum is
properly closed :
• When the two shutters are closed,
• locking button A released.
PROPORTIONING OF DETERGENTS
Pour the amount of washing into the wash-
ing
and prewash compartments if
you have selected the “prewash” option.
Pour fabric softener into the compartment
if necessary.
SELECTION OF DESIRED
PROGRAMME
Turn the programme selector to the re-
quired programme. The “Start/Pause”
pushbutton flashes green.
If you turn the programme selector to an-
other programme while a cycle is in pro-
gress, the appliance will ignore the new se-
lected programme. The “Start/Pause”
pushbutton flashes red for a few seconds.
SELECTING THE TEMPERATURE
Press the “Temperature” pushbutton re-
peatedly to increase or decrease the tem-
perature (see “Programmes table”). The
symbol means a cold wash.
SELECTING THE SPIN SPEED
Turn the spin speed selector on the desired
position.
The maximum spin speeds are :
for Cottons, Synthetics, Lingerie, Wool/
Handwash, Eco, Easy iron : 800 rpm, for
Delicates, Mini programme, Curtains, Blan-
ket : 700 rpm.
At the end of the programme, if you have
selected “Rinse hold”
or “Night silence
plus” , you then need to select a “Spin”
or “Drain” programme to finish the cy-
cle and empty the water.
Night silence plus : this cycle eliminates
all spin speed phases and ends with rinse
hold. This cycle is very quite and can be
used during the night.
SELECTING OPTIONS
You must select the different options after
selecting the programme and before press-
ing the “Start/Pause”
pushbutton (see
“Programmes table”). Press the desired
button(s) : the corresponding lights come
on. If pressed again, the lights go out. If one
of the options is not compatible with the se-
1) Depending on model.
electrolux 5