Electrolux EWB 76210 W, Руководство пользователя

Страница: 5 / 12

“PREWASH” OPTION (PREWASH)
The appliance runs a prewash at 30°C
max.
“DAILY” OPTION (DAILY)
This option allows to run a wash cycle of
lightly soiled laundry at reduced time.
“SUPER QUICK” OPTION (SUPER
QUICK)
The washing time will be reduced depend-
ing on the programme selected.
“RINSE PLUS” OPTION
The washing machine will add one or more
rinses during the cycle. This option is rec-
ommended for people with sensitive skin
and in soft water areas.
Temporary : Press the “Rinse plus”
pushbutton. The option is only active for the
selected programme.
Permanent : Hold down the “Temperature”
and “Option” pushbuttons for a few sec-
onds. The option is permanently activated,
even if the appliance is switched off. To de-
activate it, repeat the process.
“DELAY START”
This option allows you to delay the start of a
wash programme by 3, 6 or 9 hours by
pressing the “Delay start”
pushbutton.
You can change or cancel the delayed start
time at any time before you press the
“Start/Pause”
pushbutton by pressing
the “Delay start” pushbutton again
(when all indicators are off, the wash pro-
gramme will start immediately).
If you have already pressed the “Start/
Pause”
pushbutton and you want to
change or cancel the delayed start, pro-
ceed as follows :
• To cancel the delay start and start the cy-
cle immediately, press “Start/Pause”
and then “Delay start”
. Press “Start/
Pause” to start the cycle.
• To change the timer delay period, you
must go through the “Stop” position
and reprogramme your cycle.
The lid will be locked during the delayed
start time. If you need to open it, you must
first pause the appliance by pressing the
“Start/Pause”
pushbutton. After closing
the lid again, press the “Start/Pause”
pushbutton.
START OF THE PROGRAMME
Press the “Start/Pause” pushbutton to
start the cycle. The corresponding light will
come on green.
It is normal for the programme selector to
remain stationary during the cycle. The light
corresponding to the current cycle is illumi-
nated.
+ : P Wash
+ : Spin
: End of cycle
INTERRUPTING A PROGRAMME
Adding washing during the first 10 mi-
nutes
Press the “Start/Pause” pushbutton :
the corresponding light will flash green while
the appliance is paused. The lid can only be
opened around 2 minutes after the washing
machine has come to a stop. Press the
“Start/Pause”
pushbutton again to con-
tinue the programme.
Modifying the programme in progress
Before making any changes to the current
programme, you need to pause the wash-
ing machine by pressing the “Start/Pause”
pushbutton. If the modification is not
possible, the “Start/Pause” pushbutton
flashes red for a few seconds. If you still de-
cide to change the programme, you must
cancel the current programme (see below).
Cancelling the programme
If you want to cancel the programme, turn
the programme selector to the “Stop” posi-
tion .
END OF THE PROGRAMME
The washing machine stops automatically,
the “Start/Pause”
pushbutton goes out
and the light “End of cycle” comes on.
The lid can only be opened around 2 mi-
nutes after the washing machine has come
to a stop. Turn the programme selector to
the “Stop” position . Remove washing.
Unplug and close water inlet tap.
electrolux 5