Electrolux EW7T6237F8, Руководство пользователя

Страница: 24 / 40

The drain pump can operate
shortly before the appliance
fills water.
11.7 Starting a programme with
the delay start
1. Touch the Ajastin button repeatedly
until the display shows the desired delay
time. On the display the indicator shows
.
2. Touch the Aloita/Keskeytä button.
The appliance lid locks and starts the
countdown of the delay start. The display
shows the indicator
.
When the countdown is completed, the
programme starts automatically.
Cancelling the delay start after
the countdown has started
To cancel the delay start:
1. Touch the Aloita/Keskeytä button
to pause the appliance. The related
indicator flashes.
2. Touch the Ajastin button repeatedly
until the display shows and the
indicator goes off.
3. Touch the Aloita/Keskeytä button
again to start the programme
immediately.
Changing the delay start after
the countdown has started
To change the delay start:
1. Touch the Aloita/Keskeytä button
to pause the appliance. The related
indicator flashes.
2. Touch the Ajastin button repeatedly
until the display shows the desired
delay time.
3. Touch the Aloita/Keskeytä button
again to start the new countdown.
11.8 The SensiCare System
load detection
The programme duration in
the display is referred to a
medium/high load.
After touching the Aloita/Keskeytä
button, the maximum declared load
indicator goes off, the SensiCare System
starts the laundry load detection:
1. The appliance detects the load in the
first 30 seconds. In the programmes
where Time Manager is available,
during this phase the Time Manager
bars
placed below the time
digits play a simple animation. The
drum rotates shortly.
2. The programme duration could be
adjusted accordingly and could
increase or decrease. After further 30
seconds, the water filling starts.
At the end of the load detection, in case
of drum overload, the indicator
is
flashing in the display:
In this case, for 30 seconds, it is possible
to pause the appliance and remove the
exceeding garments.
Once removed the exceeding garments,
touch the Aloita/Keskeytä
button to
start the programme again. The
SensiCare phase can be repeated up to
three times (see point 1).
Important! If the laundry amount will not
be reduced, the washing programme
starts anyway, despite the overload. In
this case, it will be not possible to
guarantee the best washing results.
About 20 minutes after the
programme start, the
programme duration could
be adjusted again depending
on the capacity of water
absorption of the fabrics.
www.electrolux.com 24