Electrolux EW7F1480BI Скачать руководство пользователя страница 44

Страница: 44 / 48

Problem

Possible solution

You cannot open the

appliance door.

• Make sure that a washing programme that ends with water

in tub, has not been selected.

• Make sure that the washing programme is finished.

• Set the drain or the spin programme if there is water in the

drum.

• Make sure that the appliance receives electrical power.

• This problem may be caused by a failure of the appliance.

Contact the Authorised Service Centre.

If you need to open the door, please read carefully "Emer‐

gency door opening".

The appliance makes

an unusual noise and

vibrates.

• Make sure the levelling of the appliance is correct. Refer

to "Installation instruction".

• Make sure that the packaging and/or the transit bolts are

removed. Refer to "Installation instruction".

• Add more laundry in the drum. The load may be too small.

The programme du‐

ration increases or

decreases during

programme execu‐

tion.

• The SensiCare System is able to adjust the programme

duration according to the type and the laundry load size.

Refer to "The SensiCare System load detection" in "Daily

Use" chapter.

The washing results

are not satisfactory.

• Increase the detergent quantity or use a different deter‐

gent.

• Use special products to remove the stubborn stains before

you wash the laundry.

• Make sure that you set the correct temperature.

• Decrease the laundry load.

Too much foam in

the drum during the

washing cycle.

• Reduce the quantity of detergent.

After the washing cy‐

cle, there are some

detergent residues in

the dispenser drawer.

• Make sure that the flap is in the correct position (UP for

powder detergent - DOWN for liquid detergent).

• Make sure you have used the detergent dispenser accord‐

ing the indications given in this user manual.

After the check, activate the appliance. The programme continues

from the point of interruption.

If the problem occurs again, contact the Authorised Service Centre.

The necessary data for the service centre are on the rating plate.

14.2 Emergency door opening

In case of power failure or functioning

failure the appliance door remains

locked. The washing programme

continues when the power is restored. If

the door remains locked in case of

failure, it is possible to open it using the

emergency unlock function.
Before opening the door:

CAUTION!

Risk of burns! Make sure

that the water temperature

is not too high and the

laundry is not hot. If

necessary, wait until they

cool down.

www.electrolux.com

Содержание EW7F1480BI

















































Результаты поиска

Содержание EW7F1480BI

Отзывы:

Electrolux EW7F1480BI, Руководство пользователя, Страница: 44 / 48

Результаты поиска

Содержание EW7F1480BI

Отзывы: