42
SABBATH FEATURE
(CONTINUED)
Oven Controls
Note:
You may change the oven temperature once baking has started. Press
UPPER OVEN
UPPER
OVEN
,
BAKE
, the numeric key pads for the temperature you want (example for 425°F press
4
,
2
,
5
) and then press
START
TWICE
(for Jewish Holidays only). Remember that
the oven control will no longer beep or display any further changes
once the oven is set
for the Sabbath feature.
8. The oven may be turned OFF at any time by pressing
CANCEL
pad (this will turn the
oven OFF only). To turn OFF the Sabbath feature press and hold both the
HI
+
hi
and
LO
-
lo
pads
for at least 3 seconds.
SAb
will disappear from the display.
Should you experience a power failure or interruption, the oven will shut off. When power is
returned the oven will not turn back on automatically.
SF
(Sabbath Failure) will be displayed in
the oven control display and the surface element displays. The oven will remember that it is set
for the Sabbath and the food may be safely removed from the oven while still in the Sabbath
feature, however the oven cannot be turned back on until after the Sabbath. After the Sabbath
observance turn OFF the Sabbath feature. Press and hold both the
HI
+
hi
and
LO
-
lo
pads for at
least 3 seconds.
SAb
will disappear from the display and the oven may be used with all normal
functions. For further assistance, guidelines for proper usage, and a complete list of models with
the Sabbath feature, please visit the web at
http:\\www.star-k.org.
Notes for the use of the cooktop in Sabbath mode:
•
When the Sabbath feature is enabled on the oven control, it is also enabled on the cooktop.
To activate the Sabbath feature, it is not necessary to have one burner ON, but it is necessary
to have a Bake function active in the oven.
•
When the Sabbath feature is enabled, a surface element can be turned ON by pressing the
ON/OFF pad. The element will turn ON 15 to 30 seconds after the ON/OFF pad was pressed.
•
When the Sabbath feature is enabled, the power level of an active element can be changed.
The change will take effect after a 15 to 30 seconds delay. The element size (inner/outer)
CANNOT be changed.
•
All surface element displays will show “
Sb
” regardless of if the element is ON or OFF. All red
rings will be illuminated, regardless of the burner size.
Содержание EW30ES6CGB
Страница 1: ...318 203 819 0803 Rev C Use Care Guide Electric Slide In Range ...
Страница 55: ...55 Notes ...
Страница 57: ...318 203 819 0803 Rev C Manuel d utilisation et d entretien Cuisinière électrique encastrable ...
Страница 112: ......