Electrolux EW1000W, Инструкция по установке и эксплуатации

Страница: 19 / 21

SERVICING
38
Before contacting your local Service Centre, please make the following checks
n The START/STOP button has not been
depressed
n
The door is not closed properly
n No water is entering the machine (see: the
machine does not fill)
n The selector dial is not correctly positioned
n
The machine does not start up
n
The machine does not fill n The water tap is not turned on
n The water supply has been disconnected
n The inlet hose is kinked
n The water pressure is too low
n The water inlet filter is clogged
n
The door is not closed properly
n
The machine empties as it fills
n The end of the drain hose is too low
n The end of the drain hose is submerged in
water
n
Drain pipe has no vent-hole
n
The machine does not drain or
spin
n You have selected a gentle wash cycle which
stops with the water of the last rinse in the
tub
n
The drain filter is clogged
n The drain hose is kinked
n The drainage system pipes are blocked
n The drain hose extension is incorrect
n The wash load is unbalanced. Redistribute
the load inside the drum to allow the
machine to spin.
n
The machine leaks or overflows n Too much detergent
n Unsuitable detergent
n The inlet hose is loose
n
The detergent dispenser drawer or recess is
clogged
n The end of the drain hose is not securely
positioned
n The drainage system pipes are blocked
n
The machine vibrates or is noisy
n The internal packing and transit bolts have
not been removed
n The machine is not level
n The machine is in contact with the wall or
furniture
n The washing load is badly distributed
n The machine is overloaded
Problem
Possible cause