ENGLISH
• Synthetics, wool:
500/700 max 900 r.p.m.
• Delicates:
500 max 700 r.p.m.
EW 1067 F
• Cotton, linen:
450/650/850 max 1000 r.p.m.
• Synthetics, wool:
450/650 max 850 r.p.m.
• Delicates:
450 max 650 r.p.m.
By selecting this option the spinning phases are
suppressed.
This function is
not
available for cotton and linen.
To be selected for extremely delicate items.
7 Anti-crease button
When this button is pressed, the last rinse water is
not emptied out, to prevent the fabrics from creasing.
When the programme has finished, the pilot light of
the START/PAUSE
button flashes and the phase
light
is alight to indicate that the water must be
emptied out.
To empty out water there are 3 possibilities:
• Select programme “
D
” (draining):
The water is emptied out without spinning.
Attention!
Before selecting programme “
D
” the
selector dial has to be positioned on
O
(cancelling).
•
Depress START/PAUSE button
: after
emptying, the machine performs the spin cycle
corresponding to the type of fabric previously
selected.
•
Select the spin speed
by means of the relevant
button and then depress the START/PAUSE
button.
8 Quick wash button
By pressing this button the washing time is reduced
as follows:
• 52 minutes for cotton 95°C
• 63 minutes for cotton 60°C
• 72 minutes for cotton 40°C and 30°C
• 24 minutes for synthetics
• 8 minutes for delicates
This option is
not
available with the wool programme
and the Energy saving programme.
To be used for lightly soiled laundry.
9 Extra rinse button
Can be used with all programmes
except the wool
programme
. The machine performs 4 rinses instead
of 3.
This option is recommended for people who are
allergic to detergents and in areas where the water is
very soft.
10 “Bio” button
This function can be selected for cotton and
synthetics with a washing temperature of 40 or more
degrees.
The machine will maintain a temperature of 40° for
about 10 minutes to enable the enzymes contained
in the detergent to eliminate the dirt.
To be used for laundry with “stubborn” stains.
11 DELAY START button
The wash programme can be delayed from 1 hour
up to a maximum of 24 hours by means of this
button.
• Switch the machine on by depressing the ON/OFF
button .
• Select the programme and the required options.
• Select the delay start.
• Depress START/PAUSE button
: the machine
starts its hourly countdown.
The programme will start after the selected delay has
expired.
• Depress START/PAUSE button
.
• Depress DELAY START button until the required
time is displayed.
If you wish to cancel the delay, depress the button
only once
: the symbol
0
h is displayed.
• Depress START/PAUSE button again.
Altering the delayed start
Selecting the delayed start
11
No spin
132997230•gb 19-04-2001 15:24 Pagina 11
