8
Once set, the temperature display
shows the current temperature inside
the freezer.
Allow the cabinet to run for a period of
24 hours whenever the temperature
setting is changed. This will allow the
temperature to stabilise inside the
cabinet.
It is not necessary to reset the
temperature when the cabinet is
switched on after it has been out of
use. The electronics recalls the
previously set temperature.
Temperature inside the freezer
To ensure that foodstuff will keep for a
long time, be sure that the temperature
inside the freezer is -18°C or below.
Please note, however, that the energy
consumption increases as the
temperature decreases.
The built-in temperature display shows
the warmest temperature inside the
freezer. If the temperature is measured
using a thermometer, put it between
the products since this will reflect the
real temperature in the frozen
products. It is normal that the built-in
temperature display shows a
temperature slightly above that
measured in other ways.
Switching off
Switch off the cabinet by pressing the
power switch.
Keep the button pressed for approx. 1
second.
-
ALARM OFF
+
ON/OFF
--18
Power to the cabinet is completely
interrupted only when the power plug
is disconnected.
Alarms and other features
Door open alarm
If the door remains open for more than
about 1,5 minute, the red indicator
lamp starts flashing and an audible
alarm sounds.
To switch off the alarm:
Press the alarm shut-off button. As
long as the door remains open, the
audible alarm will sound anew at
1-minute intervals. The red indicator
lamp goes out when the door is
closed.
-
ALARM OFF
+
ON/OFF
--18
Temperature alarm
If the temperature rises above -12°C,
the red warning lamp flashes and an
audible alarm sounds. The
temperature display will then start to
flash.
To switch off the alarm:
Press the alarm shut-off button to
switch off the audible alarm. The
temperature display will stop flashing.
The red warning lamp goes out when
the temperature inside the freezer
again falls below -11°C.
Find out what caused the alarm. See
the chapter "Something not working".
-
ALARM OFF
+
ON/OFF
--11
Temperature memory
The temperature memory shows when
an alarm has been triggered in the
