
55
Instructions for totally built-in
appliances
Dimensions of the recess
Height of housing
mm 880
Depth of housing
mm 550
Width of housing
mm 560
It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth
50 mm
Width
540 mm
For safety reasons, minimum ventilation must be as
shown in Fig.
Attention: keep ventilation openings clear of
obstruction.
50 mm
min.
200 cm
2
200 cm
2
min.
D526
540
50
560
550
880
PR 32
D022
1
2
1. Fit the appliance in the niche by making sure that
it stands against the interior surface of the unit on
the side where the door hinges of the appliances
are fitted. Insert the appliance until the upper strip
butts up against the unit (1) and make sure that
the lower hinge is in line with the surface of the
unit (2).
D132
2. Apply joint the sealing strip as shown in figure.
4. Snap vent grille
(B)
and hinge cover
(E)
into
position.
Apply covers
(C-D)
on joint cover lugs and into
hinge holes.
3. Open the door and push the appliance against the
side of the kitchen unit opposite to that of ap-
pliance hinges. Fasten the appliance with 4
screws
(I)
provided in the kit included with the
appliance.
I
B
E
C
D
Downloaded from Fridge-Manual.com Manuals