Electrolux EUF28203W, Руководство пользователя

Страница: 11 / 16

Door reversibility
To change the opening direction of the door,
do these steps:
1. Remove the plug from the power socket.
2. Remove the ventilation grille. Remove the
filling and install it on the opposite side of
the grille.
3. Lay down the appliance back side down
on a wooden support.
4. Unscrew the upper hinge (a1) and the
cover washer (a2) and install this on the
opposite side.
a1 a2
5. Unscrew the lower hinge. Change the po-
sition of the pin and buffert. Screw the
lower hinge on the opposite side.
6. Tighten the pin with the adjustment span-
ner supplied.
7. Raise the appliance and install the venti-
lation grille.
8. Unscrew the handle. On the opposite
side remove the hole covers by driving a
3-4 mm drift or drill into them. Install the
handle.
Install the hole covers provided within the
accessory bag.
9. Put the cabinet in position.
Warning! Reposition, level the
appliance, wait for at least four hours
and then connect it to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
Warning! If the ambient temperature is
cold (i.e. in Winter), the gasket may not
fit perfectly to the cabinet. In that case,
wait for the natural fitting of the gasket.
electrolux 11