18
Instructions for totally built-in
appliances
Door reversibility
Recess dimensions
Height 880
mm
Depth 550
mm
Width 560
mm
The applianceÕs door has been locked in position
for transport by means of pins on both sides.
According to the door opening direction, remove
relevant pins at the top and at the bottom.
To ensure adequate ventilation, allow the clearances
shown in figure.
In addition, it is necessary that the cabinet has a
ventilation recess with the following dimensions:
depth 50
mm
width 540 mm
Push appliance into housing until top edge of the
appliance (A) touches the kitchen unit.
If there is a gap after the appliance has been fitted
into the cabinet, slide the rubber in his strip provided
onto the top edge (A) of the appliance.
Open the door and push the appliance against the
side of the kitchen unit opposite to that of appliance
hinges.
Fasten the appliance with 4 screws provided in the
kit included with the appliance.
Snap ventgrille (C) and hinge cover (D) into position.
50 mm
min.
cm
2
200
200 cm
2
min.
D567
PR01
540
50
W
D
H
A
D022
D727
C
D
D265
A
Содержание EU 6232 I
Страница 1: ...2222 145 82 I N F O OPERATING AND INSTALLATION INSTRUCTIONS FREEZER EU 6232 I ...
Страница 12: ...12 ...
Страница 13: ...13 ...