background image

19 

ENGLISH

The following events may occur during 

normal operation.

1. Protection of the air conditioner 

Compressor

•  The compressor can’t restart for 

3-4 minutes after it stops.

2. Anti-cold air (Cooling and heating 

models only)

•  The unit is designed not to blow cold air 

on HEAT mode, when the indoor heat 

exchanger is in one of the following 

three situations and the set temperature 

has not been reached. 
A)  When heating has just started.
B)  Defrosting.
C)  Low temperature heating.

•  The indoor or outdoor fan stop running 

when defrosting (Cooling and heating 

models only).

3. Defrosting (Cooling and heating 

models only)

•  Frost may be generated on the outdoor 

unit during heat cycle when outdoor 

temperature is low and humidity is high 

resulting in lower heating efficiency of 

the air conditioner.

•  During this condition air conditioner 

will stop heating operation and start 

defrosting automatically.

•  The time to defrost may vary from 4 to 

10 minutes according to the outdoor 

temperature and the amount of frost 

built up on the outdoor unit.

4. A white mist coming out from the 

indoor unit

•  A white mist may generate due to a 

large temperature difference between 

air inlet and air outlet on COOL mode in 

an indoor environment that has a high 

relative humidity.

•  A white mist may generate due to 

moisture generated from defrosting 

process when the air conditioner 

restarts in HEAT mode operation after 

defrosting.

5. Abnormal noise of the air 

conditioner

•  You may hear a low hissing sound 

when the compressor is running or has 

just stopped running. It is the sound of 

the refrigerant flowing or coming to a 

stop.

•  You can also hear a low “squeak” 

sound when the compressor is running 

or has just stopped running. This is 

caused by heat expansion and cold 

contraction of the plastic parts in the 

unit when the temperature is changing.

•  A noise may be heard due to louver 

restoring to its original position when 

power is turned on.

6. Dust is blown out from the indoor 

unit

This is a normal condition when the air 

conditioner has not been used for a 

long time or during first use of the unit.

7. A peculiar smell comes out from 

the indoor unit

This is caused by the indoor unit giving 

off smells permeated from building 

material, from furniture, or smoke.

8. The air conditioner turns to FAN 

only mode from COOL or HEAT 

(For cooling and heating models 

only) mode

When indoor temperature reaches the 

temperature setting on air conditioner, 

the compressor will stop automatically, 

and the air conditioner turns to FAN 

only mode. The compressor will start 

again when the indoor temperature 

rises on COOL mode or falls on HEAT 

mode (For cooling and heating models 

only) to the set point.

9. The air conditioner runs X-fan (Anti-

mildew) function after turning off 

the unit.

When turning off the unit under COOL 

and DRY mode, the air conditioner 

will run X-fan (Anti-mildew) function for 

4 minutes, then stop the operation and 

11. 

OPERATION TIPS

Содержание ESM09CRR-B3























Отзывы: