background image

2.

Press 

 again and again until the

display shows the delay time you want
to set (from 1 to 24 hours).
• The display shows intermittently the

programme duration and the delay
time.

The 

 indicator comes on.

3.

Close the appliance door. The count-
down starts.
• When the countdown is completed,

the programme starts.

Opening the door while the
appliance operates

If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.

Cancelling the delay start while
the countdown operates

Do the Reset function.

When you cancel the delay start
you have to set the programme
and options again.

Cancelling the programme

Do the Reset function.

Make sure that there is detergent
in the detergent dispenser before
you start a new programme.

At the end of the programme

When the programme is completed, the
display shows 0:00.

1.

Press the on/off button or wait for the
Auto Off function to automatically de-
activate the appliance.

2.

Close the water tap.

Important

• Let the dishes become cold before you

remove them from the appliance. Hot
dishes can be easily damaged.

• First remove the items from the lower

basket, then from the upper basket.

• There can be water on the sides and on

the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.

8. 

HINTS AND TIPS

8.1 

The water softener

Hard water contains a high quantity of
minerals that can cause damage to the
appliance and bad washing results. The
water softener neutralises these minerals.
The dishwasher salt keeps the water soft-
ener clean and in good conditions. It is
important to set the right level of the water
softener. This makes sure that the water
softener uses the correct quantity of dish-
washer salt and water.

8.2 

Using salt, rinse aid and

detergent

• Only use salt, rinse aid and detergent

for dishwasher. Other products can
cause damage to the appliance.

• The rinse aid helps, during the last rins-

ing phase, to dry the dishes without
streaks and stains.

• Combi detergent tablets contain deter-

gent, rinse aid and other added agents.
Be sure that these tablets are applica-
ble to the water hardness in your area.
Refer to the instructions on the packag-
ing of the products.
If you want to use these tablets out of
the applicable water hardness, you
must also use dishwasher salt. First ac-
tivate the Multitab option, then adjust
the water softener to the water hard-
ness in your area and use dishwasher
salt.

• Detergent tablets do not fully dissolve

with short programmes. To prevent de-
tergent residues on the tableware, we
recommend that you use the tablets
with long programmes.

Do not use more than the correct
quantity of detergent. Refer to the

12 www.electrolux.com

Содержание ESL6350LO





















Отзывы: