38
14.
Fix the appliance laterally by tightening screw V.
To do this, there are 2 oblong holes to the right and
left in the hinge support to allow access for the
screwdriver.
Connection to the electrical
supply
1
The appliance must only be connected to the
electricity supply by a qualified electrician.
•
The machine is fitted with a 3 x 1 mm
2
electrical
cable with moulded plug (“Schuko”).
•
The appliance must be connected to a mains cable
designed for the rated output.
•
Installation must be via a mains cable with a plug.
The plug must be accessible after the installation,
or a separation device with at least a 3 mm contact
gap must be provided in the permanent house wir-
ing that gives the appliance simultaneous all-pole
separation from the electrical supply.
House’s electrical system:
Install fuse, mains cable and socket in accordance
with the electrical schematic.
Wiring:
Heating element voltage 230 V
2.25 kW