background image

Problem and alarm code

Possible cause and solution

The appliance does not fill with wa‐

ter.

• The end indicator flashes 1 time

intermittently.

• Acoustic signal sounds 1 time in‐

termittently.

• Make sure that the water tap is open.

• Make sure that the pressure of the water

supply is not too low. For this information,

contact your local water authority.

• Make sure that the water tap is not clogged.

• Make sure that the filter in the inlet hose is

not clogged.

• Make sure that the inlet hose has no kinks

or bends.

The appliance does not drain the

water.

• The end indicator flashes 2 times

intermittently.

• Acoustic signal sounds 2 times

intermittently.

• Make sure that the sink spigot is not clog‐

ged.

• Make sure that the drain hose has no kinks

or bends.

The anti-flood device is on.

• The end indicator flashes 3 times

intermittently.

• Acoustic signal sounds 3 times

intermittently.

• Close the water tap and contact an Author‐

ised Service Centre.

The appliance stops and starts

more times during operation.

• It is normal. It provides optimal cleaning re‐

sults and energy savings.

The program lasts too long.

• If the delayed start option is set, cancel the

delay setting or wait for the end of the

countdown.

Small leak from the appliance door. • The appliance is not levelled. Loosen or

tighten the adjustable feet (if applicable).

• The appliance door is not centred on the

tub. Adjust the rear foot (if applicable).

The appliance door is difficult to

close.

• The appliance is not levelled. Loosen or

tighten the adjustable feet (if applicable).

• Parts of the tableware are protruding from

the baskets.

Rattling/knocking sounds from in‐

side the appliance.

• The tableware is not properly arranged in

the baskets. Refer to basket loading leaflet.

• Make sure that the spray arms can rotate

freely.

The appliance trips the circuit-beak‐

er.

• The amperage is insufficient to supply si‐

multaneously all the appliances in use.

Check the socket amperage and the capaci‐

ty of the meter or turn off one of the applian‐

ces in use.

• Internal electrical fault of the appliance.

Contact an Authorised Service Centre.

www.electrolux.com

18

Содержание ESL5327LO

























Отзывы: