Electrolux ESL2500RO, Руководство пользователя

Страница: 10 / 20

The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water
in your area. It is important to set the
right level of the water softener to assure
good washing results.
Water hardness
German
degrees
(°dH)
French de‐
grees (°fH)
mmol/l Clarke de‐
grees
Setting on
the water
softener
Display indi‐
cation
0 - 5 0 - 9 0.0 - 0.9 0 - 7 1 H1
6 - 11 10 - 19 1.0 - 2.0 8 - 14 2 H2
12 - 17 20 - 30 2.1 - 3.0 15 - 21 3 H3
18 - 22 31 - 39 3.1 - 4.0 22 - 27
4 1)
H4
23 - 34 40 - 60 4.1 - 6.1 28 - 42 5 H5
35 - 45 61 - 80 6.2 - 8.0 43 - 56 6 H6
1) Factory setting.
Regardless of the type of detergent
used, set the proper water hardness
level to keep the salt refill indicator
active.
Multi-tabs containing salt are
not effective enough to
soften hard water.
Regeneration process
For the correct water softener operation,
the resin of the softener device needs to
be regenerated regularly. This process is
automatic and is the part of the normal
dishwasher operation.
Water soften‐
er level
Regeneration fre‐
quency
1 off
2 every 10 cycles
3 every 5 cycles
4 every 3 cycles
5 every 2 cycles
6 every cycle
Regeneration and softener rinse takes
place in the drying phase and ends with
a complete drain. This activity lasts
around three minutes, but it does not
impact the overall cycle time. This activity
increases the total water consumption of
a programme by additional 1 l and the
total energy consumption of a
programme by additional 0.3 Wh.
All the consumption values
mentioned in this section are
determined in accordance
with the currently applicable
standard in laboratory
conditions with water
hardness 2.5mmol/L
according to the 2019/2022
regulation (water softener:
level 3).
The pressure and the
temperature of water as well
as the variations of the
mains supply can change
the values.
6.4 Changing water softening
setting
1. Open the appliance door.
2. Press On / Off.
3. Press and hold Programme
immediately for 6 seconds.
The display shows current water softener
level.
4. Press Programme to select the water
softening level.
The level is set after 6 seconds.
www.electrolux.com 10