Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads
or solvents.
9.4
Internal cleaning
If you regularly use short duration pro-
grammes, these can leave deposits of
grease and limescale inside the appliance.
To prevent this, we recommend to run
long duration programmes at least 2
times per month.
10.
TROUBLESHOOTING
The appliance does not start or it stops
during operation.
An intermittent acoustic signal operates.
Before you contact the Service, refer to
the information that follows for a solution
to the problem.
With some problems, the display
shows a message and the Time Beam
shows an alarm code.
Display
Time Beam
Problem
Attention: no intake of wa-
ter possible.
The appliance does not fill
with water.
Attention: water is not
draining.
The appliance does not
drain the water.
Attention: The anti flood
system has been activated.
The anti-flood device is
on.
WARNING!
Deactivate the appliance before
you do the check.
Problem
Possible solution
You cannot activate the appli-
ance.
Make sure that the mains plug is connected
to the mains socket.
Make sure that there is not a damaged fuse in
the fuse box.
The programme does not start.
Make sure that the appliance door is closed.
Press
OK
.
If the delay start is set, cancel the setting or
wait for the end of the countdown.
The appliance does not fill with
water.
Make sure that the water tap is open.
Make sure that the pressure of the water sup-
ply is not too low. For this information, con-
tact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is not
clogged.
32 www.electrolux.com
