Electrolux ESL 67040, Руководство пользователя

Страница: 9 / 28

USE OF RINSE AID
Caution! Only use rinse aid specified
for dishwashers.
Do not fill the rinse aid dispenser with
other products (e.g. dishwasher clean-
ing agent, liquid detergent). This can
cause damage to the appliance.
Rinse aid makes it possible to dry the
dishes without streaks and stains.
Rinse aid is automatically added during the
last rinsing phase.
Follow these steps to fill the rinse aid dis-
penser:
Filling with rinse aid
1. Press the release button
6
to open the
lid
5
of the rinse aid dispenser.
2. Fill the rinse aid dispenser
3
with rinse
aid. The mark 'max' shows the maxi-
mum level.
3. Remove the spilled rinse aid with an ab-
sorbent cloth to prevent too much foam
during the washing program.
4. Close the rinse aid dispenser. Press the
lid until it locks into position.
ADJUSTING THE RINSE AID DOSAGE
Factory set: position 3.
You can set the rinse aid dosage between
position 1 (lowest dosage) and position 4
(highest dosage).
Turn the rinse aid selector
4
to increase or
reduce the dosage.
Wash hands to remove any residue of
rinse aid from skin.
MULTITAB FUNCTION
The multitab function is for combi detergent
tablets.
These tablets contain agents as detergent,
rinse aid and dishwasher salt. Some types
of tablets can contain other agents.
Be sure that these tablets are suitable for
the water hardness in your area (refer to the
instructions on the packaging of the prod-
ucts).
The multitab function deactivates the flow
of rinse aid and salt.
The multitab function deactivates the indi-
cators of salt and rinse aid.
The program duration can increase if you
use the multitab function.
Activate or deactivate the multitab
function before the start of a washing
program. You cannot activate or deac-
tivate the function while a washing pro-
gram operates.
To activate the multitab function
• Press the multitab button, the multitab in-
dicator comes on. The function is activa-
ted.
– When you activate the multitab func-
tion, it stays on until you deactivate it.
To deactivate the multitab function and
use separately detergent, salt and rinse
aid
1. Press the multitab button, the multitab
indicator goes off. The function is deac-
tivated.
2. Fill the salt container and the rinse aid
dispenser.
3. Adjust the water hardness to the highest
level.
4. Start a washing program without dishes.
5. When the washing program is comple-
ted, adjust the water softener to the wa-
ter hardness in your area.
6. Adjust the rinse aid dosage.
electrolux 9