Electrolux ESL 6620RA, Руководство пользователя

Страница: 10 / 20

6. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
5.6 How to set the colour of the
TimeBeam
It is possible to change the colour of the
TimeBeam to match the colour of the
kitchen floor. There are 9 different colours
available.
It is also possible to deactivate the Time-
Beam.
1. Press the on/off button to activate the
appliance.
2. Do the Reset function.
3. Press and hold, at the same time,
Program and MyFavourite until the
indicators of Delay, Program, MyFa-
vourite and TimeSaver start to flash.
4. Press TimeSaver .
• The indicators of Delay, Program
and MyFavourite go off.
• The indicator of Timesaver contin-
ues to flash.
• The display shows a number and
the letter C. Each number is related
to a different colour (0C = Time-
Beam is deactivated).
5. To set a colour, press TimeSaver
again and again to go through the
menu of colours. The different colours
show on the kitchen floor.
6. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
6. BEFORE FIRST USE
1. Make sure that the set level of the wa-
ter softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent and
do not load the baskets.
If you use the combi detergent
tablets, activate the Multitab op-
tion.
6.1 Adjusting the water softener
Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
Manual Elec-
tronic
51 - 70 91 - 125 9.1 - 12.5 64 - 88
2
1) 10
43 - 50 76 - 90 7.6 - 9.0 53 - 63
2
1)
9
37 - 42 65 - 75 6.5 - 7.5 46 - 52
2
1) 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45
2
1) 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35
2
1) 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
2
1)
5
1)
10 www.electrolux.com