background image

Opening the door while the
appliance operates

If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.

Cancelling the delay start while
the countdown operates

When you cancel the delay start, the appli-
ance goes back to setting mode. You have
to set the programme again.

1.

Open the appliance door.

2.

Press and hold touchpads (

4

) and (

5

) at

the same time until the appliance is in
setting mode.

Cancelling the programme

Press and hold touchpads (

4

) and (

5

) at the

same time until the appliance is in setting
mode.

Make sure that there is detergent in
the detergent dispenser before you
start a new programme.

At the end of the programme

When the programme is completed, the
display shows 

0:00

.

1.

Press the on/off button or wait for the
Auto Off function to automatically deac-
tivate the appliance.

2.

Close the water tap.

Let the dishes become cold before
you remove them from the appli-
ance. Hot dishes can be easily
damaged.

First remove the items from the
lower basket, then from the upper
basket.

There can be water on the sides
and on the door of the appliance.
Stainless steel becomes cool more
quickly than the dishes.

8. 

HINTS AND TIPS

8.1 

The water softener

Hard water contains a high quantity of min-
erals that can cause damage to the appli-
ance and bad washing results. The water
softener neutralises these minerals.
The dishwasher salt keeps the water soft-
ener clean and in good conditions. It is im-
portant to set the right level of the water
softener. This makes sure that the water
softener uses the correct quantity of dish-
washer salt and water.

8.2 

Loading the baskets

Refer to the supplied leaflet with
examples of the load of the bas-
kets.

• Only use the appliance to wash items

that are dishwasher-safe.

• Do not put in the appliance items made

of wood, horn, aluminium, pewter and
copper.

• Do not put in the appliance items that

can absorb water (sponges, household
cloths).

• Remove remaining food from the items.
• To remove easily remaining burned food,

soak pots and pans in water before you
put them in the appliance.

• Put hollow items (cups, glasses and

pans) with the opening down.

• Make sure that cutlery and dishes do not

bond together. Mix spoons with other
cutlery.

• Make sure that glasses do not touch

other glasses.

• Put the small items in the cutlery basket.
• Put the light items in the upper basket.

Make sure that they do not move.

• Make sure that the spray arms can move

freely before you start a programme.

ENGLISH

13

Содержание ESL 6610





















Отзывы: