Electrolux ESI 66050X, Руководство пользователя

Страница: 28 / 40

What to do if…
The dishwasher will not start or stops
during operation.
Certain problems can be due to the lack
of simple maintenance or oversights,
which can be solved with the help of the hints described in the chart, without call-
ing out an engineer.
Switch off the dishwasher, open the
door and carry out the following sugges-
ted corrective actions.
Fault codes and malfunction Possible cause and solution
• continuous flashing of the light of the
running programme
• appears in the digital display
The dishwasher does not fill with
water
• The water tap is blocked or furred
with limescale.
Clean the water tap.
• The water tap is turned off.
Turn the water tap on.
• The filter (where present) in the threa-
ded inlet hose is blocked.
Clean the filter in the threaded hose.
• The water inlet hose has not been
correctly laid or it is kinked or
squashed.
Check the water inlet hose connec-
tion.
• continuous flashing of the light of the
running programme
• appears in the digital display
The dishwasher will not drain
• The sink spigot is blocked.
Clean out the sink spigot.
• The water drain hose has not been
correctly laid or it is kinked or
squashed.
Check the water drain hose connec-
tion.
• continuous flashing of the light of the
running programme
• appears in the digital display
Anti-flood device is activated
• Close the water tap and contact your
local Service Force Centre.
28 electrolux what to do if…