Electrolux ESI 6231, Информация пользователя

Страница: 8 / 36

8
Setting the water softener
The water softener must be set manually and elec-
tronically:
3
To avoid scale deposits on the dishes and in
the dishwasher, the dishes must be washed
with soft water, i.e. water with a low lime con-
tent. The water softener must be set according
to the table to the water hardness in the area
where you live. Your local water company will
be able to give you information about the wa-
ter hardness in your area.
The dishwasher must be switched off.
Setting manually:
1.
Open the dishwasher door.
2.
Remove the lower basket from the dishwasher.
3. Turn water hardness dial on the left wall of the
dishwasher interior to O or 1 (see table).
Setting electronically:
1.
Press the ON/OFF button.
3
If indicators for the programme buttons are lit,
a dishwashing cycle is activated. The cycle
must be deactivated:
Press function buttons
2 and 3 simultaneously
for approx. 2 seconds.
All additional wash programme button indica-
tors will go out.
2.
Press function buttons 2 and 3 simultaneously and
keep them pressed.
The LED indicators for function buttons 1 to 3 will
flash.
3. Press function button 1 .
The LED indicator for function button 1 will flash.
The LED indicator for the end of the dishwashing
cycle will flash simultaneously:
– The number of times that the LED indicator for the
end of the dishwashing cycle flashes corresponds
to the hardness setting.
– This sequence of flashes is repeated several times,
with a 3 second pause in-between.
4. Pressing function button 1 increases the hard-
ness setting by 1 degree.
(Exception: hardness setting 1 follows hardness
setting 10).
5.
When the hardness setting is correct, press the
ON/OFF button.
The hardness setting is now saved.
If the water softener is set electronically to “1”, this
switches off the control indicator for special salt.