18
Setting the dishwashing
programme
1. Check that the crockery and cutlery in your dish-
washer are arranged so that the spray arm is not
obstructed.
2. Fully turn on the water tap, if it is off.
3. Close the door.
4. Press the ON/OFFbutton
a
. The ON/OFF button
a
indicator illuminates.
5. Wait one second, then press the programme but-
ton for the programme you require (see „Pro-
gramme table“). The indicator above the button
you have pressed appears red. The programme
starts.
During the programme cycle, the indicator disc
rotates forward step by step, thereby indicating the
respective washing programme status.
1
If a washing programme has been started
despite the water tap being turned off, switch
off your machine, turn on the water tap, and
reset the washing programme.
Changing/Interrupting/Cancelling
the Wash Programme
3
Only change or interrupt a wash programme
in progress if it is absolutely necessary to do
so. When the appliance is closed again, the
air that has entered is heated and expands
significantly. As result water may penetrate
into the base of the appliance and trigger the
leak prevention system.
Programme correction
Once a washing programme has started, it can be
corrected by pressing another programme button.
Interrupting the wash programme by
opening the door of the dishwasher
1
Hot steam may escape from the appliance
when opening the door. There is a risk of
scolding! Open the door carefully.
1. Open the door of the dishwasher. The wash pro-
gramme stops.
2. Close the door. The wash programme continues.
Cancelling the Wash Programme
1. Press the ON/OFF button
a
. The ON/OFF button
a
indicator goes off.
2. Press the ON/OFF button
a
again. The ON/OFF
button
a
indicator illuminates and the wash pro-
gramme will quickly be finished.
Setting or Changing the
Start Delay Timer
With the button
Å
, you can preprogramme the pro-
gramme start time in 2-hour steps from 2 to 12 hours
in advance.
1. Switch on the dishwasher: Press the ON/OFF but-
ton
a
.
2. Press button
Å
, until the indicator disk shows the
number of hours after which the programme
should start.
3. Press the programme button for the programme
you require (see „Programme table“).
Shorten the set start time
•
Press button
Å
, until the indicator shows the
number of hours after which the programme
should start.
Prolong the set start time
1. Switch off the dishwasher: Press the ON/OFF but-
ton
a
.
2. Press the programme buttons
b
and
â
and
keep them pressed.
3. Press the ON/OFF button
a
. The dishwasher is
switched on and the indicator disk returns to its
initial position.
4. Press button
Å
, until the indicator disk shows the
number of hours after which the programme
should start.
5. Press the programme button for the programme
you require (see „Programme table“).
Содержание ESF675
Страница 1: ...D i s h w a s h e r User Instructions ANC 822 945 780 00 0801 ESF 675 EN ...
Страница 33: ...33 ...
Страница 34: ...34 ...
Страница 36: ......