7
The current level is indicated by the number of
flashes made by the 70° 80’ indicator
light, that alternates 5 seconds off with a number of
flashes, this for about 60 seconds.
Example:
1 flash
= level 1
2 flashes = level 2
3 flashes = level 3
4 flashes = level 4
5 flashes = level 5
3. To change the level, press the 70° 80’
programme push button. Each time the push
button is pressed the level changes.
Example:
if the current level is 3, pressing only one time the
70° 80’ programme push button, level
4 is selected.
The 70° 80’ indicator light remains off
for about 5 seconds after which starts flashing
indicating the new level selected.
4. To memorise the new level, switch off the
dishwasher by pressing the ON-OFF push button.
If your water is level 1 it is already soft
and therefore there is no need to use salt.
With the setting of the water softener at
level 1 the salt indicator light on the
control panel will always remain off.
Use salt from level 2 upwards.
From level 2 upwards, if salt refilling is
necessary, the salt indicator light will
illuminate only in setting mode and at the
end of the washing programme.
During the run of the programme it will
remain off.
