background image

1. On/Off indicator light 

2. On/Off pushbutton

On
By depressing this button the machine starts
operating and, at the same time the On/Off
indicator light illuminates.

Off
When the washing programme has finished, the
machine stops automatically and the pilot light
remains on.
To switch the indicator light off or to stop the
machine at any time, press this button.

3. Salt refilling indicator light

This light illuminates when the salt container needs
refilling. This light will remain on in a soft water
area where salt is not required.

4. Door handle

To open the door press the catch in the top of the
recess and pull the door toward you at the same
time.
To close the door simply push it.

5. Programme sequence indicator

As the programme progresses, the sequence
indicator turns, to show the phase in the wash
programme the appliance has reached.

Prewash / Rinse and Hold

Wash

Cold rinse

Hot rinse

Hot air drying

6. Washing temperature selection
buttons

These buttons allow you to select the
temperature of the washing water (see
“Washing programmes” chart).

7. Programme guide

This is a summary of the “Washing
programmes” chart to help you select the
correct programme.

8. Programme marker

9. Programme selector dial

To select a programme, turn the programme
selector dial clockwise, making sure that the
programme letter you wish to select is in line
with the programme marker on the control
panel.

The control panel

5

PCP37GB

1

2

3

6

7

4

5

8

9

Содержание ESF473
























Отзывы: