Electrolux ESF 66060 Скачать руководство пользователя страница 14

4. Close the door.

– The countdown starts. The display

shows remaining time to the start of
the washing program.

– When the countdown is completed,

the washing program starts automati-
cally.

With the delay start function set, the
Washing indicator light goes off. Once
the countdown of the delay start has
ended, the washing program will start
automatically and the Washing indica-
tor light comes on.

If you open the door during the count-
down, this will interrupt the countdown.
When you close the door again, the
countdown continues from the point of
interruption.

Cancelling delay start

1. Press and hold at the same time func-

tion buttons B and C buttons until all the
program lights come on.
– When you cancel delay start, you also

cancel the washing program.

2. Set a new washing program.

Warning!

 Only interrupt or cancel a

washing program if necessary. Open
the door carefully. Hot steam and
water can escape.

Interrupting a washing program

1. Open the appliance door. The washing

program stops.

2. Close the appliance door. The washing

program continues from the point of in-
terruption.

Cancelling a washing program

1. Press and hold at the same time func-

tion buttons B and C buttons until all the
program lights come on.

2. Release the two buttons, the washing

program has been cancelled.

At this point, you can follow these steps:
1. Switch off the appliance.
2. set a new washing program.
Fill the detergent dispenser with detergent
before you set a new washing program.

End of the washing program

The washing program is complete when:
• The display shows 0.
1. Switch off the appliance.
2. Open the door.

– For better drying results, keep the

door ajar for some minutes before
you remove the dishes.

Let the dishes cool down before you re-
move them from the appliance. Hot dishes
are easily damaged.

Standby mode

If you do not switch off the appliance at the
end of the washing program, the appliance
automatically goes into standby mode. The
standby mode decreases power consump-
tion to less than 1 watt.
Three minutes after the end of the program,
all indicator lights go off and the digital dis-
play shows one horizontal bar.
Press one of the buttons (not the on/off
button), to go back to end of program
mode.

Removing the load

• First remove items from the lower basket,

then from the upper basket.

• There can be water on the sides and

door of the appliance. Stainless steel be-
comes cool more quickly than the dishes.

WASHING PROGRAMS

Washing programs

Program

Degree of soil

Type of load

Program description

AUTO 50°-65°

1)

Any

Crockery, cutlery,
pots and pans

Prewash
Main wash up to 50°C or
65°C
1 or 2 intermediate rinses
Final rinse
Drying

14 

electrolux

Содержание ESF 66060

























Отзывы: