Before use
Before using your dishwasher for the first time:
1. Ensure that the electrical and water connections comply with the installation instructions
2. Remove all packaging from inside the appliance
3. Pour 1 litre of water inside the salt container and then fill with salt
4. Fill the rinse aid dispenser.
5. Run a Rinse and Hold programme.
Filling with salt
(specifically designed for use in dishwashers)
The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply,
which would have a detrimental or adverse effect on the operation of the appliance. The higher the content of these
salts, the harder your water is. If your water is already soft (lower than 8°TH or 4°dH) there is no need to use salt.
Your local Water Authority can advise you on the hardness of the water in your area.
SR15
SR19
SR20
4
The control panel
1. On/Off push button
2. Programme guide
3. Door handle
4. Programme selector dial
5. Programme sequence indicator
As the programme progresses, the programme
selector dial turns, to show the phase in the
wash programme the appliance has reached.
Prewash/Rinse and Hold
Wash
Cold rinse
Hot rinse
Drying
1
2
3
4
5
152978 39/1 14-06-2001 8:51 Pagina 4