Electrolux ESF 45010 Скачать руководство пользователя страница 29

care and cleaning electrolux  29

Frost precautions 
Avoid placing the machine in a
location where the temperature is
below 0°C. If this is unavoidable,
empty the machine, close the
appliance door, disconnect the water
inlet pipe and empty it. 

Moving the machine 
If you have to move the machine
(moving house etc....): 
1. Unplug it.
2. Turn the water tap off.
3. Remove the water inlet and

discharge hoses.

4. Pull the machine out together with

the hoses. 

Avoid over tilting the machine during
transportation. 

NEVER try to remove the spray
arms.
If residues of soil have clogged the
holes in the spray arms, remove them
with a cocktail stick.

External cleaning
Clean the external surfaces of the
machine and control panel with a
damp soft cloth. If necessary use only
neutral detergents. Never use
abrasive products, scouring pads or
solvent (acetone, trichloroethylene
etc....). 

Internal cleaning
Ensure that the seals around the
door, the detergent and rinse aid
dispensers are cleaned regularly with
a damp cloth.
We recommend every 3 months to
run the wash programme for heavy
soiled dishes using detergent but
without dishes.

Prolonged periods of non-
operation 
If you are not using the machine for
any prolonged period of time you are
advised to: 
1. Unplug the appliance and then

turn off the water. 

2. Leave the door ajar to prevent the

formation of any unpleasant
smells. 

3. Leave the inside of the machine

clean. 

117997 87/1en  2-05-2007  11:32  Pagina 29

Содержание ESF 45010

















































Отзывы: