35 electrolux
installation
usage instructions
electrolux 36
Grounding
The power cord has a three-pronged
grounded plug for your personal
safety. It must be connected to a
grounding type wall receptacle, in
accordance with the legislation
governing electric installations in your
country, as well as any local
regulations. Do not remove the
grounding prong, do not use a two
pronged adaptor, and never make a
connection to the schematic. Use
the cord supplied with the equipment
(do not change it). If the cord is
damaged, it must be immediately
replaced by specialized personnel.
For your safety, installation must be
grounded. If it is not grounded, it
must be adapted for this by
specialized personnel.
Usage instructions
How to turn on the refrigerator
Plug the refrigerator into the outlet
and set the temperature control to the
maximum position.
A few minutes after completely
closing the door, both sides of the
appliance will be warm.
The external temperature of the
refrigerator will slowly rise, and then
stabilize. After approximately 30
minutes, open the freezer door and
you will then feel cold air. This means
that the appliance is operating
properly. After a certain amount of
time, the thermostat will turn itself off
and on again automatically, and will
maintain the compartments at the
desired temperature.
Filling the refrigerator
Follow these instructions the first time
you fill the refrigerator, or after you
defrost it.
01. Turn the refrigerator on and let it
run for two hours prior to putting
food inside.
02. If the food is fresh, put it in the
refrigerator little by little, in one
hour intervals.
03.iAfter filling the refrigerator, adjust
the thermostat to the appropriate
position, following the instructions
under item "Temperature
Adjustment".
Do not place food over the air vents;
be careful to allow sufficient space for
proper air circulation.
ENG
ENG
ENG
