Electrolux ERL-4796S, Руководство по обслуживанию

Страница: 13 / 19

diagram. If the actual resistance value is not in the prescribed range, repair the sensor.
9)
“
C7
”
displayed as the fridge temperature
Note: Temperature sensed by the fridge and its evaporator sensors is beyond controllable
range
注：
Attention:
If such malfunction occurs, the appliance will be running in a special safe mode. The
refrigeration function of the appliance is protected but temperature will not be displayed.
Check if the ambient temperature is above 45°C or not and if the appliance is just
switched on or not. If it is just switched on, check the temperature display after the
appliance has run for 1 hour.
Cause A(most likely): sensor plug does not contact well with the power board
Remedy: check, clean or repair the plug and/or socket
Cause B: the fridge and its evaporator sensors are broken
Remedy: check the resistance value of the sensors and compare it to the value in the
diagram. If the
actual resistance value is not in the prescribed range, repair the sensors.
10) Connection malfunction
When the fridge displayed “C8”, it is connection malfunction with the fridge
Remedy: check the connection of the cords and that of the two power boards
11) Audio/video warning
Audio warning: beep alarm
Video warning: “high temperature” flash warning
Four kinds of warning:
A
、
Door open alarm for fridge, freezer and wine compartment:
Warning starts: when any door opens more than 180 seconds the alarm starts.
Warning ends: when all doors are properly closed, the beep alarm stops. The beep alarm
could also be
ended by pressing any button. But the alarm resumes 180 seconds later if
any door is still open.
B
、 High temperature warning
Warning starts: when the fridge temperature is or above 12°C; when the wine
compartment temperature is or above 19°C; when the freezer temperature is or above
–6°C, the “high temperature” sign start flashing.
Warning ends:
A. If the high temperature alarm only occurs to the fridge or the wine compartment, the
“high temperature” sign automatically stops flashing when the temperature falls to below
corresponding warning temperature.