Electrolux ERF3869AFW, Руководство пользователя

Страница: 18 / 24

2
1
• Use a small screw driver to remove the
adapter from the door on the opposite
side and pull out the cable (1).
• Remove the adapter (2) from the cable
and move it to the cable on the oppo-
site side. Push the cable into the door.
1
2
4
3
• Pull the cable through the hinge (1).
• Screw on the lower hinge with 3 screw
(2).
• Insert the cable holder and screw on
this (3).
• Connect the cable (4) which comes
from the door.
• Remove the covers on the handles
carefully with a small screw driver.
• Unscrew the handle.
• On the opposite side remove the hole
covers by driving a 3–4 mm drift or drill
into them.
• Install the handle.
• Install the covers on the handle.
• Install the hole covers provided within
the accessory bag.
• Raise the appliance and install the ven-
tilation grill.
• Put the cabinet in position.
WARNING!
Reposition, level the appliance,
wait for at least four hours and
then connect it to the power
socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabi-
net.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the nat-
ural fitting of the gasket.
18 www.electrolux.com