7.7
Installation of the Taste Guard filter
The Taste Guard filter is an active carbon
filter which absorbs bad odors maintain
the best flavour and aroma for all food-
stuffs without risk of odor cross contami-
nation.
On delivery the carbon filter is in a plastic
bag to preserve performance.
• Open the air lever flap.
• Take the filter out of the plastic bag.
• Insert the filter in the slot found in the
back of the air lever flap.
• Close the air lever flap.
The filter should be handled care-
fully so fragments do not loosen
from the surface.
Make sure that the air lever flap is
closed to obtain proper function.
7.8
Door reversibility
1
3
4
2
To change the opening direction of the
door, do these steps:
• Remove the plug from the power.
• Remove the ventilation grille. Remove
the upper filling and install it on the op-
posite side of the grille.
• Remove the pedal hole cover and install
the cover provided in the accessory
bag on the opposite side.
• Lay down the appliance back side
down on a wooden support.
• Unscrew the hinge (1) and remove the
cover plate (2) and the support (3).
• Remove the cover (4) on the opposite
side and install the support (3) the cover
plate (2) and the hinge (1). Install the
cover (4) on the opposite side.
16 www.electrolux.com
