Electrolux ERB 8643, Инструкция, Страница: 15 / 22

69
GB
Change of door opening direction
Should the setting-up place or handling demand it, door-
opening direction can be refitted from right-handed to left-
handed.
Appliances on the market are right-handed.
Following operations are to be done on the basis of figures
and explanations:
To perform the operations listed below it is
recommended to ask another person for help who safely
can keep the doors while performing the operations.
Disconnect the appliance from the electricity supply.
Open the doors and dismount the double door hinge
(a,b) by removing the screws (2 pieces) (c). (fig.2)
Take off the double door hinge (a,b,c) by gradually
removing it from the cabinet, slightly tilting both doors.
Do not forget to remove the plastic spacer (b) under the
hinge. (fig.2)
Take off the refrigerator door by pulling it slightly
downwards.
Take of the freezer door by pulling it slightly upwards.
Unscrew the top door hinge pin (d) of the refrigerator
then screw it back on the other side. (fig.1)
Remove the insert of the plinth (e) by a screwdriver.
(fig.4)
Unmount the lower hinge pin (f) and its washer (h) and
mount them on the other side. (fig.4)
Replace the insert of the plinth (e) on the other side.
Remove the covering nails (3 pieces) (n,k) of the double
door holder on the left side and put them to the other
side. (fig.2)
Remove the (t, z) plugs from both doors. (fig.3)
Remove the (u, v) door closing devices by unscrewing
the (s) screw.
Replace the (u, v) door devices on the opposite side of
the other door after turning them, then fix them by
screwing the (s) screw.
Replace the (t, z) plugs on the opposite side.
Fit the pin of the double door hinge (m) into the left drill
of the freezer door. (fig.2)
Fit the freezer door to the lower door hinge pin (f). (fig.4)
Fit the refrigerator door to the upper door hinge pin (d)
then slightly tilting both doors fit the pin of the double
door hinge (m) into the left drill of the refrigerator door.
fig. 1.
fig. 2.
fig. 3.
fig. 4.