34
TECHNICAL SPECIFICATIONS
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the serial number plate
correspond to your domestic power supply. Voltage can vary by ±6% of the rated voltage. For
operation with different voltages, a suitably sized auto-transformer must be used.
The technical data is indicated in the rating plate on the left side inside the appliance.
GB
D
D590
PR24
H
E
F
D
PR185
F
F
F
PR228
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Door reversibility
Before carrying out the operations described
below, pull out the mains plug from the wall
socket.
To carry out door reversal operate as follows:
Remove the ventilation grill (D);
Remove bottom hinge (E);
Slide out the lower door from middle hinge (H)
and remove the latter;
Slide out the upper door from pin (5), unscrew
the latter and then screw it down into the hinge
provided on the opposite side;
Remove the two plugs, to reveal the holes for
the hinge pivots, and remount them on the other
side;
Refit the upper door and the middle hinge on
the opposite side;
Refit the lower door and bottom hinge (E) on
the opposite side.
Remove the plug (F) from the ventilation grill (D)
and replace it on the opposite side.
Re-assemble the ventilation grill (D).
Unscrew the handle. Refit it on the opposite
side after having pierced the plugs with a
punch. Cover the holes left open with the plugs
contained in the documentation pack.
Warning:
After having reversed the opening direction
of the doors check that all the screws are
properly tightened and that the magnetic
seal adheres to the cabine”. If the ambient
temperature is cold (i.e. in Winter), the gasket
may not fit perfectly to the cabine”. In that case,
wait for the natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdrier.
