Electrolux ER 1626 T, Инструкция пользователя, Страница: 4 / 16

DESCRIPTION OF THE APPLIANCE
4
➀
➁
➂
➃
➅
➆
➄
➀
Dairy compartment
➁
Can storage shelf with
egg tray
➂
Bottle storage shelf
➃
Salad bin
➄
Glass shelf (for storing
fresh meat)
➅
Storage shelves
➆
Thermostat control
OPERATION
Before use
Remove all securing tapes. Wash inside the
appliance with lukewarm water and bicarbonate of
soda (5 ml to 0.5 litre of water). Do not use soap or
detergent as the smell may linger. Dry thoroughly.
Setting the temperature
The temperature inside the refrigerator is regulated by
a thermostat control knob with 6 temperature
positions and one «OFF» (O) position.
Position 1 = minimum coldness
Position 6 = maximum coldness
Turn the thermostat control knob to the required
position.
An intermediate position is usually the most suitable,
although the temperature will be affected by:
l Room temperature
l
How often the door is opened
l
How much food is stored
l
Position of the appliance
In determining the correct temperature control setting
all these factors have to be considered and some
experimentation may be necessary.
When altering the temperature setting, allow 24 hours
for the temperature to stablise before making further
changes.
Important
During prolonged periods of abnormally hot
weather, if the thermostat is set on too high
a number, the cooling system may operate
continuously and the fridge cooling plate
may not defrost. Turning the knob to a
lower number will cause the automatic
defrosting to resume.
If you wish to return to a lower temperature,
turn the thermostat knob to a higher
number, however you should turn the
setting lower occasionally to allow
automatic defrosting.