Electrolux EQE6000, Руководство пользователя

Страница: 10 / 20

10 www.electrolux.com
Step 2.
Pull handle down until it locks into position and
aligns with template on the door.
Step 3.
Remove templates after handle fitment.
Congratulations! You have successfully installed
your new refrigerator.
5 . USING YOUR REFRIGERATOR
Refrigerators work by transferring heat from
the food insideto the outside air. This operation
makes the back and sides of the refrigerator
feel warm or even hot particularly at start-up
and on warm days – this is normal.
Avoid placing food against the air vents
in the refrigerator as it affects efficient
circulation. If the door is opened frequently,
a light frosting will occasionally occur on
the freezer’s interior. This is normal and will
clear after a few days. If the freezer door is
accidentally kept open, a heavy frost will coat
the inside walls and should be removed.
Your new refrigerator uses a high-speed
compressor, along with other energy-efficient
9. Plug your refrigerator straight into its own
power point and never use a double
adapter. If you need to roll the refrigerator
to get to the plug, remember to raise the
stability foot first.
10. Before you put any food in your refrigerator,
it’s recommended you leave it on for 2 or 3
hours to check it is running properly.
Installing door handles
For models with ‘Pole’ handles, the handles are
supplied prepackaged inside your refrigerator
and will require fitting.
Step 1.
Position top door handles (LH & RH) over
handle mounts and align with template on the
door.
components, which may make unusual sounds
and be more noticeable at night and quieter
times. These sounds simply indicate your
refrigerator is working how it should. They
include:
• Compressor running noises;
• Air movement noise from the small fan
motor;
• A gurgling sound, similar to water boiling;
• A popping noise, heard during automatic
defrosting; and
• A clicking noise, prior to compressor
start-up.
Further details can be found in the
Troubleshooting Guide