away. During this period an odor may be
emitted, it is therefore advisable to open a
window for ventilation.
Important!
There is a hot surface label on
the oven door. Please remove the label from
the door before first use of the appliance.
The cooling fan
The cooling fan comes on immediately the
top oven or grill is switched on. It may run on
after the ovens are switched off until the ap-
pliance has cooled. During the cooling down
period the cooling fan may switch on and off.
Warning!
Always allow the cooling fan
to cool the appliance down before
switching off the electrical supply to
carry out cleaning or maintenance.
Control panel indicator neon(s)
The indicator neon will operate when the
oven(s) is switched on. The indicator neon
will glow. It may turn on and off during use to
show that the setting is being maintained. If
the neon does not operate as the instructions
indicate the controls have been incorrectly
set. Return all controls to zero and reset fol-
lowing the instructions for the required set-
ting.
Condensation and steam
When food is heated it produces steam sim-
ilar to a boiling kettle. The vents allow some
of this steam to escape. However, always
stand back from the appliance when opening
the door(s) to allow any build up of steam or
heat to release.
If the steam comes into contact with a cool
surface on the outside of the appliance, e.g.
a trim, it will condense and produce water
droplets. This is quite normal and is not
caused by a fault on the appliance.
To prevent discoloration, regularly wipe away
condensation and foodstuff from surfaces.
For your safety wall coverings at the rear of
the appliance should be securely fixed to the
wall.
Cookware
Baking trays, dishes etc., should not be
placed directly against the grid covering the
fan at the back of the oven.
Do not use baking trays larger than 30cm x
35cm (12” x 14”) as they will restrict the cir-
culation of heat and may affect performance.
Setting the Time
The oven only operates when the time
has been set.
1. When the appliance is connected to the
electrical supply or when there has been
a power cut, Time
flashes automati-
cally.
2. Using the or button, set the current
time.
3. After approx. 5 seconds, the clock stops
flashing and the clock displays the time of
day set.
The appliance is now ready to use.
Initial Cleaning
Before using the oven for the first time you
should clean it thoroughly.
Warning!
Do not use any caustic,
abrasive cleaners! The surface could be
damaged.
To clean metal fronts use commercially
available cleaning agents.
1. Turn the oven function switch to oven
lighting .
2. Remove all accessories and the shelf
support rails and wash them with warm
water and washing up liquid.
3. Then wash out the oven with warm water
and washing-up liquid, and dry.
4. Wipe the front of the appliance with a
damp cloth.
electrolux
5