Electrolux EOU43002, Руководство пользователя, Страница: 32 / 44

32 electrolux
installation
•
Fit the appliance mounting brackets
using the two holes indicated to the
adjacent cabinets.
•
Check that the mounting brackets are
level. They can be adjusted if
necessary by using the extra holes at
the ends of the brackets. Once the
brackets are level, drill a pilot hole
through the central hole in the bracket
and fit the remaining screw.
How to finish unpacking
•
Place packed appliance next to the
space in which it will be installed.
•
Remove the appliance packing except
for bottom tray, which should be left in
position until the appliance is ready to
be fitted into its cabinet.
•
NOTE: It is imperative that the
appliance is left in the base to
protect both the appliance and the
floor.
•
Ensure the user is given these
operating instructions.
Important: Switch off at the mains,
miniature circuit breaker and if
appropriate, remove fuse before
commencing any electrical work.
To remove cover of mains terminal
From the rear of the appliance, remove
mains input terminal cover to gain access
to terminal block.
•
First remove retaining screw with
pozidrive screwdriver.
•
Prise cover loose using screwdriver in
position (1) then lever off with
screwdriver in position (2) at either
side.