Electrolux EON6701FXN Скачать руководство пользователя страница 9

39

lamp    will start flashing. Then, proceed as follows:

To set the duration time:
1.

press button “ ” or “ ”.

2.

After the setting is carried out, wait for 5 seconds:
the "Cooking Duration" pilot lamp   will come on
and the display will revert to the time of day.

3.

When cooking time is over, the oven will be switched
off automatically and an acoustic alarm will be heard,
while the pilot lamp will start flashing. Turn the oven
function and the thermostat control knob to zero.
To switch off the acoustic alarm, press any button.

NOTE:

 when doing this operation, the oven will be

operated again, therefore, remember to turn the oven
function and the thermostat control knob to zero at
the end of the cooking time.

To cancel the duration time:
1.

Press button 

 

repeatedly to select the “Cooking

Duration” function. The relevant pilot lamp   will flash
and the display will show the remaining cooking time.

2.

Press button “ ” until the display shows “0:00”. After
5 seconds the pilot lamp will go out and the display
will revert to the time of day.

“End of cooking” function 

Thanks to this function, you can set the oven to switch off
automatically when a programmed end of cooking time is
over. Place food in the oven, select a cooking function and
adjust the cooking temperature. Press button 
repeatedly to select  the “End of cooking” function. The
relevant pilot lamp   will start flashing.  Then, proceed as
follows:

To set the End of cooking time:
1.

press button “ ” or “ ”.

2.

After the setting is carried out, wait for 5 seconds:
the “End of cooking” pilot lamp   will come on and
the display will revert to the time of day.

3.

When cooking time is over, the oven will be switched
off automatically and an acoustic alarm will be heard,
while the pilot lamp will start flashing. Turn the oven
function and the thermostat control knob to zero.
To switch off the acoustic alarm, press any button.

NOTE:

 when doing this operation, the oven will be

operated again, therefore, remember to turn the oven
function and the thermostat control knob to zero when
cooking is over.

Содержание EON6701FXN































Отзывы: