Electrolux EOE7C31V, Руководство пользователя

Страница: 12 / 40

Clock function Application
MINUTE MINDER To set a countdown time. This function has no effect
on the operation of the oven. You can set the MI‐
NUTE MINDER at any time and also when the oven
is off.
00:00 COUNT UP TIMER To set the count up, which shows how long the oven
works. This function has no effect on the operation of
the oven. It is on immediately when the oven starts to
heat. The COUNT UP TIMER is not turned on if DU‐
RATION and END are set.
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows and 12:00.
"12" flashes.
1. Touch or to set the hours.
2. Touch .
3. Touch or to set the minutes.
4. Touch or .
The display shows the new time.
To change the time of day touch
again and again until starts to flash.
7.3 Setting the DURATION
1. Set a heating function and
temperature.
2. Press again and again until
starts to flash.
3. Use or to set the minutes for
DURATION time.
4. Press or the DURATION time
starts automatically after 5 seconds.
5. Use or to set the hours for
DURATION time.
6. Press . The DURATION time
starts automatically after 5 seconds.
When the set time ends, the signal
sounds for 2 minutes.
and time
setting flash in the display. The oven
turns off.
7. Press a sensor field to stop the
signal.
8. Turn off the oven.
7.4 Setting the END
1. Set an oven function and
temperature.
2. Touch again and again until
starts to flash.
3. Use or to set the END and
to confirm. First you set the
minutes and then the hours.
When the set time ends, an acoustic
signal sounds for 2 minutes.
and the
time setting flash in the display. The
appliance deactivates automatically.
4. Touch a sensor field to stop the
acoustic signal.
5. Turn off the appliance.
7.5 Setting the TIME DELAY
function
1. Set an oven function and
temperature.
2. Touch again and again until
starts to flash.
3. Use or to set the minutes for
DURATION.
4. Touch .
5. Use or to set the hours for
DURATION.
6. Touch , the appliance switches to
the setting of the END function.
The display shows flashing .
7. Use or to set the END and
to confirm. First you set the
minutes and then the hours.
www.electrolux.com 12