Electrolux EOD67642, Руководство пользователя

Страница: 20 / 60

20
electrolux
operation
To fit the main oven shelves
The shelves should be fitted with the
straight rods uppermost on the frame
and the forms towards the back of the
oven.
Back of the oven
Frame
Straight Rods
To remove a shelf slide the shelf
towards you until the shelf stop is
reached. Tilt shelf up at the front so
that the stops clear the side supports.
Lift shelf clear.
To install a shelf, reverse the above
steps. Each shelf position has an
upper and lower support wire, ensure
the shelf is placed between these two
support wires.
Main oven grill
CAUTION: Accessible parts may be
hot when the grill is in use. Young
children should be kept away.
The grill is a dual circuit grill which means
that the full area of the grill can be used,
or for economy purposes, the centre
section only can be used when cooking
smaller quantities of food.
Using main oven grill
• The oven must be switched on
before setting any cooking function
or programme.
• Press the Oven Cavity selector
until the main oven cavity indicator
is illuminated.
•
Press the Function selector until
the required setting is shown.
The grill settings are as follows: -
Centre grill area at full
power.
Full grill area at full power.
• Wait 5 seconds until your choice is
confirmed. The temperature will
automatically set to 250°C.
•
If you wish to alter the set
temperature, you may do so by
pressing or until the required
temperature setting is reached.
• To switch off a function press the
Function selector once. The
function neon will go out and the
display will return to the time of
day.
Things to note
• The oven light will illuminate.
• The heat indicator neons will scroll
until the oven has reached the
desired temperature and then stop,
an audible signal will sound. When
the oven has been switched off the
bars that are still lit indicate the
remaining residual heat in the oven.
• The cooling fan for the controls
may operate after a time.