Electrolux EOD6332X, Инструкция пользователя

Страница: 22 / 44

22
THINGS TO NOTE
The top oven indicator neon will glow until the oven
has reached the desired temperature and then go
out. It will turn ON and OFF periodically during
cooking showing that the oven temperature is being
maintained.
The cooling fan for the controls may operate, after a
period of time.
Dishes, tins or trays should not be placed directly on
the top oven base as it becomes very hot and
damage will occur.
TO FIT THE TOP OVEN SHELF
The cranked shelf should be fitted with the straight
rods uppermost on the frame and the forms towards
the back of the oven. If not fitted correctly the anti-tilt
and safety stop mechanism will be affected.
HINTS AND TIPS
·
All cooking should be carried out on shelf
positions one and two using a cranked shelf.
When more space is required, for example when
roasting or casseroling, a straight shelf from the
main oven may be placed on the top oven base.
·
Arrange the shelves in the required positions
before switching the oven ON. Shelves are
numbered from the bottom upwards.
·
To remove a shelf slide the shelf towards you
until the shelf stop is reached. Tilt shelf up at the
front so that the stops clear the slide supports.
Lift shelf clear. To install a shelf, reverse the
above steps. Each shelf position has an upper
and lower support wire, ensure the shelf is
placed between these two support wires.
·
There should always be at least 2.5cm (1”)
between the top of the food and the element.
This gives best cooking results and allows room
for rise in yeast mixtures, Yorkshire puddings etc.
When cooking cakes, pastry, scones, bread etc.,
place the tins or baking trays centrally below the
element.
·
Ensure that food is placed centrally on the shelf
and there is sufficient room around the baking
tray/dish to allow for maximum circulation.
·
Stand dishes on suitably sized baking trays to
prevent spillage onto the oven base and to help
reduce cleaning.
·
DO NOT place baking trays directly on the oven
floor as it interferes with the oven air circulation
and can lead to base burning; use the lower shelf
position.
·
The material and finish of the baking tray and
dishes will affect the degree of base browning of
the food. Enamelware, dark, heavy or non-stick
utensils increase base browning. Shiny
aluminium or polished steel trays reflect the heat
away and give less base browning.
·
DO NOT use the grill pan as a baking tray as this
will increase base browning of the food.
·
Because of the smaller cooking space, lower
temperatures and shorter cooking times are
sometimes required. Be guided by the
recommendations on page 23.
·
For economy leave the door open for the shortest
possible time, particularly when placing food into
a pre-heated oven.
3 –
2 –
1 -