time until the display goes out. This
step also activates the appliance.
•
Cooking with the lamp off
- touch
and hold for 3 seconds to deactivate
the lamp during cooking.
•
Eco functions
- refer to section "Heat-
ing Functions" (for selected models on-
ly).
6.
CLOCK FUNCTIONS
Symbol
Function
Description
Minute Minder
To set a countdown (max. 2 h 30 min). This function
has no effect on the operation of the appliance. You
can also activate it when the appliance is deactiva-
ted. Use to activate the function. Press
or
to set the minutes and
OK
to start.
Duration
To set how long the appliance has to be in opera-
tion (max. 23 h 59 min).
End Time
To set the switch-off time for a heating function
(max. 23 h 59 min).
If you set the time for a clock function, the
time starts to count down after 5 sec-
onds.
If you use the clock functions Du-
ration and End Time , the appli-
ance deactivates the heating ele-
ments after 90 % of the set time.
The appliance uses the residual
heat to continue the cooking
process until the time ends (3 - 20
minutes).
Setting the clock functions
1.
Set a heating function.
2.
Press
again and again until the
display shows the necessary clock
function and the related symbol.
3.
Press
or
to set the necessary
time. Press
OK
to confirm. When the
time ends, an acoustic signal sounds.
The appliance deactivates. The dis-
play shows a message.
4.
Press a sensor field to stop the signal.
Useful information:
• With Duration and End Time you must
set the heating function and the tem-
perature first. Then you can set the
clock function. The appliance deacti-
vates automatically.
• You can use Duration and End Time at
the same time, if you want to automati-
cally activate and deactivate the appli-
ance on a given time later.
• When you use the Core Temperature
Sensor (if applicable), the Duration and
End Time functions do not work.
6.1
Heat + Hold
The Heat + Hold function keeps prepared
food warm at 80 °C for 30 minutes. It ac-
tivates after the baking or roasting proce-
dure ends.
Useful information:
• You can activate or deactivate the func-
tion in the Basic Settings menu.
• Conditions for the function:
– The set temperature is more than 80
°C.
– The function Duration is set.
Activating the function
1.
Activate the appliance.
2.
Select the heating function.
3.
Set the temperature above 80 °C.
4.
Press
again and again until the
display shows Heat + Hold . Press
OK
to confirm.
12 www.electrolux.com
Содержание EOC5851AK
Страница 1: ...EOC5851AK EN OVEN USER MANUAL ...
Страница 22: ...22 www electrolux com ...
Страница 23: ...ENGLISH 23 ...
Страница 24: ...www electrolux com shop 892949092 B 112012 ...
