20
7.
gently extract the three inner glasses, starting with
the uppermost one first.
8.
Once the cleaning is carried out, insert the inner
glasses in the oven door.
DO NOT clean the oven door while the glass
panels are warm. If this precaution is not
observed the glass panels may shatter.
If the door glass panels become chipped or
have deep scratches, the glasses will be
weakened and must be replaced to prevent
the possibility of the panel shattering. Contact
your local Service Force Centre who will be
pleased to advise further.
The three glasses in the middle are special glasses that
have been treated to resist heat. One is marked with a
small dot located on a corner and one with a black frame
(Fig. 9).
It is important that, when refitting the oven door, the inner
glasses are fixed in the right position.
To check if this operation has been carried out correctly,
when inserting the glass, make sure that the surface of
the glass marked with a black frame looks upwards and
that the dot is located on the upper left corner of the
glass (see Fig. 9).
9.
10.
as soon as the inner glasses are inserted in the
oven door, fix the rubber distance holder as shown
in the picture;
11.
insert the inner glass support;
12.
then, fix the two screws located on the sides of the
oven door.
